success

Registers (R) can alter the state of Nodes or influence the flow of Resources based on the computation of multiple inputs coming from either Nodes in the diagram or your own input during a diagram Step-by-Step Run.

Properties

You can adjust the properties of a selected Register, such as Label, Formula, Limits, Style, and Position, in the Properties panel on the right. They can also be displayed and plotted on the chart.

Label

Use the Label field to provide context for what the Register represents in your game.

Registers can be passive or interactive. You can set their state in the Properties panel under Functions by ticking “Interactive” ON or OFF.

By default, Registers are passive.

Passive Registers

Passive Registers may gather input from multiple origin Nodes, compute them based on formulas, and influence the state of other Connections or Nodes within the diagram.

Each Register input State Connection is assigned a letter Formula. Use these identifiers as variables in the formula the Register needs to compute.

💡 Note above that when the diagram is running the Register displays the computed result, before the run, it displays fx.

Passive Registers Properties

Formula

For passive Registers the Formula is used to input the function you want it to compute.

info

🧙 The Formula field for Registers supports functions from the math.js library. You can find out more about them in the Math.js Functions article.

Limits

You can set a minimum and maximum value for a Register, which can further affect its value.

For example: If the flow of producing Coins in a game is influenced by several factors (inputted to a Register), and you’ve set the minimum limit of that Register to 10, no matter how the inputs evolve throughout a play session, the player will, by the end of it, have at least 10 Coins.

Interactive Registers

A Register becomes interactive when the “Interactive” option is ticked in the Properties panel under Functions. After ticking the “Interactive” option, Registers become editable. You may use the arrows on the Register to interact and change its value.

Please note that you cannot interact with a Register during Predictions!

Interactive Registers Properties

warning

Interactive Registers do NOT support formulas!

Limit

Use a minimum and/or a maximum value under and/or over which the Register doesn’t allow changes.

Value

Upon ticking on “Interactive”, two properties become available for interactive Registers:

Initial Value – sets the value the Register passes on upon running the diagram.
Step Value – sets a multiplier for each interaction with the Register.

In the example above, the interactive Register has a set initial value of 3, and a step value of 2, as shown in the screenshot below. With each interaction, the Register changes its value (in real-time, during the diagram Step-by-Step Run) with +/-2.

Show In Chart

Tick “Show in Chart” (an option also available in the contextual menu at right-click) to plot the values taken by the Register at each Time Step when running the diagram.

Multiplying Target Value

In the example above we are multiplying the Target value. To obtain this, we used an interactive Register with a Step Value equal to the Target’s value. In order to have an integer x multiplying factor, we used “+100%” as a Formula on the State Connection.

This results in the Target being multiplied by the number of Steps that the user interactively changes on the Register during execution.

💡 Note: for those looking for the deprecated m operator, this method generates the same effect. If you need to multiply functions on the Target, then the Origin needs to be a passive Register with a formula identical to that of the Target.

Using math.js functions

Basic Calculations

add(a,b) adds the values of a and b
subtract(a,b) subtracts b from a
multiply(a,b) multiplies the values of a and b
divide(a,b) divides a by the value of b

Exponential Functions

square(a) returns the square value of a (a*a)
cube(a) returns the cubic value of a (a*a*a)
sqrt(a) returns the square root of a
cbrt(a) returns the cubic root of a
pow(a,b) returns the value of a raised to the power of b

OR / AND Register

In the example below, we’re using Registers to keep track of certain value occurrences.

On the left, a random number of Resources (D6 – between 1 and 6) are being produced and stored in the Pools. In each Step, the Register checks if the number of Resources stored in either of the two Pools is higher than 2, sums the values up, and activates the Source to its right if the sum is >0.

On the right, we use the same model to count when the Pools simultaneously contain a number of Resources above 2. The formula on the Register uses multiplication instead of addition to achieve this.

The Drains have the role of resetting the Pools values.

If Statements

If you’re trying to model complex if statements, you can use Registers to calculate conditions. You can find an example for both context and solution, in the article on how to emulate the Artificial Player legacy component, with machinations.io Nodes and Connections.

Other math.js functions

🧙 For more examples on using math.js functions with Registers, try out the public diagram below.

Example: Level Progression

This model represents a simplistic leveling-up system.

The Register “Gained XP” computes XP received by the player based on Enemies killed and XP per kill.
The Register “Level up cost” computes the cost of leveling up based on player Level and a “variable” that you can manually tweak during Play by clicking on the arrows of the Register (starting value: 100)

Watch this in-depth Registers webinar

Progression

About

Tags

Enjoying what you see?Show your appreciation by saving it with a click!

Be the first to this diagram

More from alexis.tomasini

Product

Solutions

Roles

Resources

Compare

Pricing

Company

Enjoying what you see?
Show your appreciation by saving it with a click!